When it comes to matters concerning you home’s water system, you should be very alert. This will not only save you money but also it is a major step towards ensuring you are not a victim of water damage. There are numerous steps on how to find the source of water leakage.
There are various steps on how to do water damage restoration in Chicago. The steps may be of immense help. These steps include:
Checking the toilet for leaks
This is done by removing the tank’s cover and keenly listening to hear if there is any hissing sound. If there is, assess the leak and see if you can fix it. If you cannot fix that leak call a plumber. Listening is not the only way on how to find the source of a leakage. You can also: add some coloring into the tank, wait for a few minutes to see the out come. If the color is persistent, it means you have a leak that is allowing water to seep through.
Check the water connection
If the toilet is fine, check your water connection from the main source. Mostly, this procedure is done by looking at your meter. Firstly, turn off the valve in the house. If the meter continues reading, the leak is between the meter and the valve. However, if the mater doesn’t read with the valve turned off, the leak is definitely some where in the house!
Locate leaks within the house
If by reading the meter your efforts bear no fruits, check the pipes in the house. Most if not all houses, have hose-bibs at the front and the back of the house. These are the pipes that bring water into the house. This is mostly done by listening if the water is flowing. If the water is flowing, then the problem is in your internal connections. You should therefore look for leaks in: shower, sink and taps.
Other look out areas
How to find out the level of water damage extraction in Chicago entails going to the extreme end to find a solution for the leaks. For those who have gardens or swimming pools, it is advisable to always check on them from time to time.
Pipes are not only the source of leaking water. Your roofing could also be a source of the leak. If your roof is not properly built or maintained, whenever it rains it will always leak! In addition, if your notice change in some parts of your premises, you could be able to know the exact position of the leak. These changes include: cracks on the wall and growth of mould. This will certainly point out at the problem without much effort.
The only way to prevent leaks is by ensuring you have strong and durable structure. During the initial water connection, make sure you go for the best pipes and ensure they are well fitted. The pipes should also be protected against human activity and harsh climatic conditions such as: strong wind, sun and rains. For your roofing, also go for the best. It is through knowing how to find the sources of leaking water that you can surely stay clear of water damage. Most importantly, after getting the source of the leak, always seek professional help to fix the problem!
Heavy rains and leaking pipes may result to flooding or simply wetness of your house. Flooding may cause a lot of damage to interior décor and costly properties. Wetness on the other hand can cause development of moulds, infections and make the house very uncomfortable.
Here are the useful methods on how to dry water affected areas of homes:
Siphon the water out using a hosepipe
If your house is flooded and is located on an area that is relatively drained, consider using a hosepipe to siphon the water out. Stretch the pipe and make sure the longer section is on the slanting section outside the house and fill it with water while closing the outer end. Then, dip the ending on the house side inside the flooded waters and open the other end. The water will drain from the house through the outer end slowly under gravity. The process is cheap and can drain a lot of water within a very short period of time.
Pump the water out
If you cannot siphon the water out, consider using a water pump. The machine will pump the water out within a very short period of time. This is advisable if there is a lot of water especially on the basement that cannot be removed easily using other methods. Remember that you can hire such pumps from plumbing contractors or even plumbing emergency firms.
Dig drainage tunnels
If the flooded waters stand outside on the compound, it is better to establish drainage channels to lead the water away. You should check the general terrain of the area to establish the lower section that would allow the water to flow freely. Then, using a hoe and a sand shovel, make sizeable trenches and extend them to the standing waters. All the waters will drain away and the compound will start drying naturally.
Open the doors and windows for natural drying
Once the standing waters have been cleared, make sure to open all windows and doors to allow the house to dry naturally. Remove all the wet items such as area rugs and furniture and dry them out in the open. The sweeping breeze will take away the dampness and leave the house dry. Only return the furniture once they are completely dry.
Heat the house for faster drying
Natural drying could take a lot of time before your house gets back to normal. You should therefore consider drying it using electrical heaters. Put the heaters on and set them at specific temperatures that will continuously dry the house. As temperatures continue rising even moisture hidden in cracks and crevices will dry up and give the room special dryness and comfort.
You can also heat the house by lighting the fireplace. Just like the heater, the fireplace will be a source of heat for continued drying. The fireplace is considered better because it is cheap and can be kept on for longer without raising the electricity bill. If you follow these methods, you can be assured of having your house and compound dry within a short period of time.
Water damage refers to possible losses resulting from intrusion by water where it enables an attack of a material or system by destructive processes such as mould growth, rotting, rusting or other damages. These damages may go on for a long while without being detected. When handling water damage, special equipments that are used include:
1. Ultrasonic Circuit Board Cleaning Machines: These are machines that are specially designed to clean electronic PCB and spare parts of the circuit by removing dust, flux, water or any kind of useless material from the circuit. The machines are safe for electrical components and have fast cleaning action thus helps in water damage cleaning of circuit boards and other electrical devices.
2. Ultrasonic Stainless Steel Cleaner: These are machines that are used to remove water damage corrosion on stainless steel materials and surfaces. The machines use ultrasound shock waves that have more effective cleaning power thus suitable in removing corrosion, proteins, waxes and heavy oil. The machines are also able to polish stainless steel surfaces and materials during the cleaning.
3. Alcohol dispensing bottles: These are safe bottle pumps that are used to dispense a small amount of alcohol when cleaning water damage corrosion. The alcohol is dispensed into a dish on the lid when pressed down by a brush. The bottles are specifically designed to keep the rest of the alcohol from evaporating when being used thus helps in conserved use.
4. Corrosion Cleaning Erasers: These are erasers that are attached to a pencil. They can be used in cleaning water damage corrosions on any keypad, copper connection and terminals. Cleaning is done by rubbing the corroded area or surface with clean pencil eraser enabling the clean eraser to pick up corrosion from the corroded surface.
5. Water Damage Indicator Sticker: This is a small device that is sometimes referred to as water damage tape, liquid contact indicator or water contact indicator tape or liquid submersion indicator. It is a small indicator that turns from white into a different color when in comes into contact with water. The stickers are placed in several places within an electronic gadget and help to detect if the gadget is in contact with water.
6. Damage Pointer Indicator Sticker: This is a sticker that is mainly used by manufacturing and refurbished companies. It is placed in places like circuit board. In the case of any defect, the sticker is used to indicator where the damages have occurred on the circuit board.
7. “Do Not Remove” Breakable Indicator Sticker: This is a sticker that is normally placed on top of screw to discourage consumers from opening their phones or other electrical gadgets and try to repair them on their own thus avoiding warranty repair. After repairs, the stickers can be put back on top of the screws. The stickers can also serve to prevent water from entering into the device.
Water damage equipments come in different forms and different specifications. This is because they are made or manufactured by different companies but generally the same type of machines will serve the same function.
Water damage is quite often difficult, if not impossible to prevent. However, this does not mean that when it occurs, it is easily taken. In fact most people get so frustrated and discouraged when their property is water damaged but it is very important that the issue is tackled and taken care of immediately in order to avoid further destruction of the property.
Water damage caused by natural disasters such as floods and hurricanes may be quite hectic for you to handle alone, requiring hiring the services of a restoration company. However, water damage that is caused by leakages due to poor plumbing or clogged toilets may be relatively easy for you to handle them yourself. The procedure is quite easy to follow. The following are steps involved in fixing a water damage.
1. Identify the source of moisture
Firstly, you need to identify the source of the water. In case the water is coming from a burst pipe, you need to turn off the main water supply in order completely halt the floor of water and prevent further leakage of water.
2. Clearing out the room
Once you have identified the source of water and prevented further leakage, it is important that you clear out the room. This will require you to remove the furniture and other important items that are present in the room. It is vital that you remove all the objects in the room, regardless of the fact whether they are physically wet or not. This is because those that are not wet face the risk of getting damaged by the humidity and bacteria in the room.
3. Extraction of sewage and water
This step involves removing any and all the water in the room. This includes water that is visible as well as that which may be hidden in cracks of the walls and other areas. This will probably require the use of high power vacuum cleaners and dehumidifiers. Opening the windows may also assist in drying out the room by allowing fresh air circulation and use of fans may increase the flow of air and quicken the drying process.
In order to kill the bacteria and mold that may have formed due to the dampness, you may consider using some form of detergent. This step of eliminating mold growth in your home is called mold remediation. This is an important step because mold growth if left unattended can be risky to not just your property but your health too.
5. Assess the extent of the water damage
Once you have completed the steps above, you will be able to gauge the extent of the water damage and fully assess what is required for the repair and restoration process. You will also be able to know what needs to be fully replaced and what just requires just minor repairs. If the damage was an extreme case, where the water involved was a significant amount, then you may need to consider hiring the services of a professional.
In conclusion, these are steps involve in fixing a water damage. By following them you will be able to discover the problem and ensure that it is fully resolved.
Water leaks from pipes and lines form some of the main causes of damage to properties. Leakages can weaken your building walls, foundation and destroy most of your interior décor. If the leaks occur in the compound, your long tended lawns can be washed within hours. The main question that many people keep asking is what to do for leaking water lines and pipes?
Reach an emergency plumbing expert
When you spot leakages, you need to immediately inform an emergency plumbing expert about the problem. The expert will tell you to give him the details of the leak in order to know the right course of action. If the problem is not major or the leaking has just started, he can give instructions to follow. However, if the leakage is intensive and has caused a problem such as flooding in the house, he will rush to your home with an emergency plumbing unit. It is important for you to get the number of an emergency plumbing expert early enough because you do not know when such leakages can occur.
Switch off the water from the mains
The design of most piping is done with special understanding that repairs or maintenance would require switch offs. Therefore, you should note there different gate valves such as before the water gets into the house or even specific rooms. If you can locate these valves, all you need to do is switching them off so that the leaking lines and pipes are starved of additional water. You should frequently check the layout of the water piping in the house and the entire compound to know where the valves are located.
Switch off power
When pipes start leaking, the water flows to other systems and can cause a lot of damage. Once leaking water gets into the electrical wiring system, it can cause short-circuits and destroy your electronics or even electrocute your family members. You should therefore put off the electricity from the mains until the leakage has been fixed and electrical system confirmed to be okay.
Protect your properties from damage
When you note the leaking pipes and lines are releasing a lot of water or the house is already flooded, it is good to try and salvage the most important things. You should check sections of the house that are raised such as tables, shelves, and even fridge-tops to place things such as documents. You can even evacuate others and place them outside the house where they are safe from flooded waters. This is important because unlike items such as tables, special documents might be very difficult to replace.
If the leaking pipes are releasing a lot of water and the house is flooded, consider siphoning the water out using a horse pipe. You can also scoop it out using containers as you wait for the emergency plumbing experts to arrive and assist you. If the leaking lines are in the compound, you may also consider making some channels to drain the pools to the natural water way. Remember to take some photos using your camera for easier determination of damage by the insurance company for compensation.